MISSION 760i SE Bookshelf Speakers (Sec Hand)
- Good Working Order -
- Average Cosmetic Condition -
The MISSION 760I SE Speakers visual identification is restricted to the gold badgework on the clever wraparound moulded frame grille, and the twin bi-wire terminals on the back. Inside, the main driver turns out to have a much larger magnet than the standard 760i.
The package as a whole is certainly one of the neatest and prettiest around. The speaker is fashionably slim with a moulded plastic baffle which incorporates a reflex port and helps maximise the internal volume. It’s aligned to be used with the main driver above the tweeter, which is one reason it looks a little odd with the grille removed, but the latter’s artful design creates little, if any, acoustic impediment.
The box is more rigid than most. The rather small panels being 16mm stock, in place of the more usual 12mm, and a foam lining instead of fibrous fill provides damping. The 100mm doped paper cone and 19mm fabric dome drivers were both very tightly fitted, while good quality internal wiring is hardwired throughout, via a simple, well spaced crossover.
- Dimensions: 180W x 295H x 200Dmm
- Enclosure Type: 2 way bass reflex
- Recommended Amplifier: 25 to 75 Watts
- Frequency Response: 70Hz to 20kHz
- Nominal Impedance : 6 Ohms
- Weight : 5kg